Wrangler 4WD V6-3.8L (2009)
4. Install the pressure hose (2) at the pump pressure port. Tighten the tube nut to 31 Nm (23 ft. lbs.).
5. Reinstall the coolant bottle back into position.
6. Fill and bleed the power steering system See: Service and Repair/Steering - Power Steering System Bleeding.
7. Check for leaks.
8. Install the air box assembly See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and
Repair/Air Cleaner Body - Installation.
Return Hose
RETURN HOSE
1. Install the return hose (2) to the vehicle.
2. Install and secure the return hose at the routing clips (1).
3. Install the bumper to grille panel (3).
