Amanti V6-3.5L (2006)
Memory Positioning Systems: Description and Operation
IMS (Integrated Memory System)
IMS (INTEGRATED MEMORY SYSTEM)
DESCRIPTION
Operation Flow Chart
Seat and mirror positions set by the driver are memorized in the IMS control unit by the position sensors. So, those positions can be returned to the
memorized positions by the IMS control switch and keyless control even when the seat and mirror positions are changed. (This is called replay
operation). In addition, LIN communication is performed between power seat control unit and power window. For the sake of safety, replay is prohibited
during driving and replay operation can be stopped immediately.
FUNCTION
1. Manual operation of the seat and mirror by the manual switches.
2. Memory and replay (memory and replay operation) of seat and mirror positions by the IMS control switch: up to 2 driver's.
3. Auto memory in case of lock of the keyless and replay (keyless memory and replay operation) in case of unlock: up to 2 drivers.
4. Down operation of the outside mirror in case of backup.
5. Functional controls.
1. Up/down and left/right controls of the driver's outside mirror.
2. Up /down and left/right controls of the passenger's outside mirror.
3. Driver's power seat.
-
Forward and backward control of the reclining seat.
-
Up and down control of the seat height. Up and down control of the tilt.
-
Forward and backward control of the slide.
OPERATION
MANUAL OPERATION
1. Mirror switch on the power window main drives mirror motor.
2. Seat manual switch sets seat position and operates 4 way simultaneously.
3. Manual seat control is made by the motor regardless of CPU.
MEMORY OPERATION
1. If the position switch is pressed within the 5 seconds after pressing the memory switch when the ignition is ON, then, current positions of the seat
and mirror are registered. (Memory permits status lasts for 5 seconds after the memory switch is on, and the memory permit status is cleared
thereafter. In other words, current position is registered only if the position switch is pressed in memory permit status.)
2. Memory permits status will be cleared if any of the following conditions is met.
-
After 5 seconds from the memory switch ON.
-
When the manual switch of seat is ON.
-
When the ignition is OFF.
-
When the STOP switch is ON.
-
When the memory registration is completed.
