Amanti V6-3.5L (2006)
2) Clean the piston surface and inner cylinder using alcohol or the specified brake fluid.
Brake fluid: DOT 3 or DOT 4
Inspection
INSPECTION
1. Check the cylinder for wear, damage and rust.
2. Check the piston surface for wear, damage and rust.
3. Check the caliper body and sleeve for wear.
Reassembly
REASSEMBLY
1. Clean all components with isopropyl alcohol except for the pad and shim.
2. Install the piston seal.
3. After applying the specified brake fluid to the piston outer surface, install the piston into the cylinder.
4. Install the piston boot.