Amanti V6-3.5L (2006)
2. Using the special tool (OK130 331 AAOA), disconnect the hub from the knuckle.
3. Using the special tools (09455-21000, 09545-34100), remove the wheel bearing inner race from the hub.
4. Remove the dust cover mounting bolt, and then remove the dust cover.
5. Place the inner race on the bearing. Using the special tools (09216-21600,09216-22100), remove the wheel bearing outer race from the knuckle.
INSPECTION
1. Check the hub for cracks and splines for wear.
2. Check the snap ring for cracks or damage.
3. Check the knuckle inner surface for scoring and cracks.
REASSEMBLY
1. Apply a thin coat of multi-purpose grease to the knuckle and bearing contact surface.
