Amanti V6-3.5L (2006)
Information Bus: Description and Operation
Assist Door Module
ASSIST DOOR MODULE
DESCRIPTION
Assist power window switch, a component of CAN, performs CAN communication with BCM, seat ECU, tilt ECU, driver power window switch and
PIC module, and it also performs LIN communication with switch module and safety ECU. Passenger controls assist power window switch button
located inside of the assist door to operate power window, mirror, door lock and unlock.
1. It performs 4 types of operation of manual up/down and automatic up/down operation for 4 power windows.
2. It performs manual operation of the mirror position by manual switch, (up/down and left/right)
3. It performs registration and replay of mirror position by the mirror switch up to 2 drivers.
FUNCTION
POWER WINDOW CONTROL
1. This switch controls power window up/down, automatic up/down from assist side. Assist's power window switch sends input signal through LIN
communication by the manual up/down and automatic up/down switch input. At the same time manual up/down and automatic up/down signals
sends to the wires
-
Assist safety window ECU receives the signal and performs manual up/down and automatic up/down functions.
2. Timer function
Power window switch can be controlled for 30 seconds after the ignition is turned off. This function stops immediately even within 30 seconds if the
front door is opened.
OUTSIDE MIRROR CONTROL BY THE SWITCH
1. Manual control of right outside mirror
If the mirror direction switch (up, down, left and right) is pressed when mirror selection switch on driver power window switch is in outside RH
under ACC ON condition, then operating signal is sent to assist power window switch through CAN communication.
OUTSIDE MIRROR MEMORY OPERATION BY THE MEMORY SWITCH
