kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Body Control Module|Description|Page 1667 > < Body Control Module|Description|Page 1665
Page 8
background image

3. Illumination stops condition

a. IGN key hole is illuminated
b. IGN ON or Entered arm mode by RKE
c. IGN key hole illumination is turned off immediately key hole illumination = OFF

DEFROSTER TIMER

1. Condition 1

a. Alternator level high & defroster is OFF

(Defroster relay = OFF and defogger activity = OFF)

b. Defroster is activated (defroster SW = ON)
c. Defroster outputs are turned ON

2. Condition 2

a. Alternator level high & defroster is ON
b. Defroster SW Input pushed again or T1 delay has elapsed since defroster has been turned on
c. Defroster outputs are turned OFF

3. Condition 3

If alternator input is changed to low, defroster outputs should be turned OFF immediately.

DECAYED ROOM LAMP

1. Condition 1

a. (IGN1 is OFF) & (door are closed) & (room lamp is OFF)
b. A door is opened more than 0.1 sec (all door not closed = ON)
c. Room lamp is turned ON

2. Condition 2

a. (IGN1 is OFF) & (a door at least is open)
b. All door are closed (all door not closed = OFF)
c. The power of room lamp is reduced from 100% to 75% to indicate that the door is closed. And then the lamp is slowly decayed off during 5 - 6

sec.

3. Condition 3

a. (IGN1 is OFF) & (room lamp is decaying)
b. IGN1 ON
c. Stop decaying operation immediately

4. Condition 4

a. (Room lamp is OFF) & (IGN1 is OFF) & (door are closed).
b. Unlock by RKE.
c. Room lamp is turned ON for 30 sec.

Body Control Module|Description|Page 1667 > < Body Control Module|Description|Page 1665