Amanti V6-3.5L (2006)
2. Using the special tool (09216-21100), press-in the bearing to the knuckle.
NOTE:
^
Do not press against the inner race of the wheel bearing because that can cause damage to the bearing assembly
^
Always use a new bearing assembly.
3. Install the snap ring into the groove of the knuckle.
4. Install the dust cover.
5. Using the special tool (09545-21100), press the hub on to the knuckle.
NOTE: Do not press against the outer race of the wheel bearing because that can cause damage to the bearing assembly.
6. Tighten the hub to the knuckle to 200 Nm (2000 kg-cm,148 ft. lbs.) with the special tool (09517-21500).
7. Rotate the hub to seat the bearing.
