Amanti V6-3.5L (2006)
Rear Door Window Regulator: Service and Repair
Notice: There is no stand alone Rear Door Module article authored by the manufacturer. This information was extracted from the Rear Door Removal
article.
Rear Door Module Removal and Installation
1. Remove door frame inner cover.
1. Remove door inner cover fasteners (2).
2. Remove door frame inner cover.
2. Remove door inner handle cover.
1. Remove cover and screw.
3. Remove ashtray.
1. Remove ashtray from door trim.
2. Disconnect ashtray lamp connector.
4. Remove door trim.
1. Remove door handle pad.