Amanti V6-3.8L (2007)
Front Door Window Regulator: Service and Repair
Notice: There is no stand alone Front Door Module article authored by the manufacturer. This information was extracted from the Front Door Removal
article.
Front Door Module Removal and Installation
1. Remove door frame inner cover.
1. Remove door inner cover fasteners(2).
2. Remove outside rearview mirror.
1. Remove outside rearview mirror screws(3).
Tightening torque:
7 - 11 N.m (0.7 - 1.1 Kg.m, 5.1 - 8.0 Ib.ft)
2. Remove outside rearview mirror clip(1).
3. Disconnect mirror connector.
3. Remove door inner handle cover.
1. Remove cover and screw.