Amanti V6-3.8L (2007)
13. Disconnect breather Pipe assembly (A).
14. Disconnect LH injector connector.
15. Remove intake manifold (A) and gasket.
INSTALLATION
1. Install intake manifold and new gasket on the cylinder head.
Tightening torque
1st : 3.9 - 5.9 Nm (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)
2nd : 18.62 - 23.52 Nm (1.9 - 2.4 kgf.m, 13.74 - 17.36 lb-ft)
3rd : Repeat 2nd step twice or more
NOTE:
Be careful of the installation direction.
a - h : 1st step order
1 - 8 : 2nd step order