Amanti V6-3.8L (2007)
2. Overview
^
Sends LF command data to initiators.
^
Controls sensor state:
Ignition on - Normal Delayed
Ignition off - Storage.
^
Auto-Locates sensors.
^
Auto-Learns new sensors.
^
Receives RF data from sensor.
^
Uses sensor data to decide whether to turn on TREAD Lamp / wheel location LED's.
^
Uses sensor information, distance traveled, background noise levels, Auto-learn status, short circuit output status, vehicle battery level, internal
receiver states to determine if there is a system or a vehicle fault.
OPERATION
1. General Function
^
Auto-locate/learn takes place only once per Ignition cycle.
^
On successful completion, 4 road wheel sensor ID's + 1 spare, together with their respective road wheel positions are latched into memory for
monitoring.
^
Until Auto-learn completes, previously learned sensors (together with their respective locations) are monitored for under inflation / leak
warnings.
^
Spare tire inflation / DTC state is not displayed.
^
Spare tire DTC's are available through diagnostics only.
2. General Conditions to Learn New Sensors:
^
Receiver must Auto-Locate 4 road sensors.
^
Auto-location / learning only functions when speed is more than 20 kph (approx. 15 mph).
^
Receiver must determine that it is confident that sensor is not temporary:
a) Uses vehicle speed.
b) Uses confidence reduction of previously learned sensors.
^
Typical time at driving over 20 kph to learn a new sensor is up to 10 minutes.
3. General Conditions to Un-Learn a sensor that is removed:
^
It takes less than 10 minutes at 20-30kph.
^
Confidence reduction is dependant on vehicle speed and the number of sensors known to the receiver.