Amanti V6-3.8L (2007)
Crankshaft Position Sensor: Description and Operation
CRANKSHAFT POSITION SENSOR (CKPS)
DESCRIPTION
Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no
CKPS signal input, fuel is not supplied and the main relay does not operate. That is, vehicle can't run without CKPS signal. This sensor is installed on
transaxle housing and generates alternating current by magnetic flux field which is made by the sensor and the target wheel when engine runs. The
magnetic flux increases when the protrusion of the target wheel is getting near to the sensor and does not change in the most close position. When the
protrusion becomes estranged from the sensor, magnetic flux disappears and alternating current is generated. The target wheel consists of 58 slots and 2
missing slots on 360 CA (Crank Angle).
Waveform
Waveform
