Amanti V6-3.8L (2007)
Transmission Position Switch/Sensor: Service and Repair
TRANSAXLE RANGE (TR) SWITCH
REMOVAL
1. Remove the battery terminal.
2. Remove the battery and battery tray.
3. Remove the air cleaner assembly (Refer to the automatic transaxle-Removal/installation procedures).
4. Disconnect the inhibitor switch connector(A).
5. Remove the control cable(A) from the manual control lever.
6. Remove the inhibitor switch(A) and manual control lever(B).
INSTALLATION
1. Set the inhibitor switch to the "N" position.
2. Set the inhibitor switch control shaft to the "N" position.
3. Install the inhibitor switch and manual control lever.