Amanti V6-3.8L (2007)
Seat Belt Tensioner: Service and Repair
SEAT BELT PRETENSIONER
REMOVAL
CAUTION:
-
Never attempt to disassemble or repair the Seat Belt Pretensioner (BPT).
-
Do not drop the Seat Belt Pretensioner (BPT) or allow contact with water, grease, oil Replace it if a dent, crack, deformation or rust is
detected.
-
Do not place anything on the Seat Belt Pretensioner (BPT).
-
Do not expose the Seat Belt Pretensioner (BPT) to temperature over 93 °C (200 °F).
-
Seat Belt Pretensioner (BPT) functions one time only. Be sure to replace the Seat Belt Pretensioner (BPT) after it is deployed.
-
Be sure to wear gloves and safety goggles when handling the deployed Seat Belt Pretensioner (BPT).
1. Disconnect the negative (-) cable from battery and wait for at least three minutes.
2. Remove ignition key from the vehicle.
3. Remove seat belt lower anchor bolts (2).
4. Remove seat belt upper anchor bolts (2).
5. Remove the center pillar lower trim.