Amanti V6-3.8L (2007)
8. Install the parking brake cable (B) assembly and wheel speed sensor (A).
9. Install the rear wheel & tire.
Tightening torque Nm (kgf.m, lb-ft): 90 - 110 (9.0 - 11.0, 65 - 80)
Rear Lower Arm
REAR LOWER ARM
INSTALLATION
1. Connect the rear lower arm with rear cross member with the cam bolt (C) and then temporarily tighten the nut.
2. Install the coil spring (A) and support the lower portion of the rear lower arm (B) with a jack.
3. Adjust height of the jack to place the bolt (B) holding rear lower arm and carrier assembly through the mating holes.
