Amanti V6-3.8L (2007)
INSPECTION
1. Check the hub for cracks and splines for wear.
2. Check the oil seal for cracks or damage.
3. Check the brake disc for scoring or damage.
4. Check the knuckle for cracks.
5. Check the bearing for cracks or damage.
REASSEMBLY
1. Apply a thin coat of multi-purpose grease to the knuckle and bearing contact surface.
2. Using the special tool (09216-21100), press-in the bearing to the knuckle.
NOTE
^
Do not press against the inner race of the wheel bearing because that can cause damage to the bearing assembly.
^
Always use a new bearing assembly
3. Install the snap ring into the groove of the knuckle.