Amanti V6-3.8L (2007)
TORQUE
Shaft nut: 18-25 Nm (1.8-2.5 kgf.m, 13.0-18.1 lb-ft)
Bolt(2EA): 10-12 Nm (1.0-1.2 kgf.m, 7-8 lb-ft)
4. Install the control cable to the manual control lever.
5. Connect the inhibitor switch connector.
6. Installation is the reverse of the removal.
7. Turn the ignition switch ON after installation. Move the shift lever from "P" range to "L" range, and verify that the A/T gear position indicator
follows the transaxle range switch.
