Borrego 2WD V6-3.8L (2009)
Antitheft Antenna: Service and Repair
Removal
1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel (A). .
3. Remove the ignition switch cover (A) after loosening a screw.
4. Disconnect the 6P connector of the coil antenna and then remove the coil antenna (A) after loosening the screw.
Installation
1. Reassemble the coil antenna after connecting the connector.
2. Reassemble the ignition switch cover.
3. Reassemble the crash pad lower panel.