Borrego 2WD V6-3.8L (2009)
3. Remove the external amplifier(A) after loosening the mounting nuts(3EA).
Installation
Front speaker
1. Install the speaker to the speaker mounting hole in the door in-panel.
2. Reconnect the speaker connector.
Rear speaker
1. Install the speaker to the speaker mounting hole in the door in-panel.
2. Reconnect the speaker connector.
Crash pad center speaker
1. Reconnect the connector to the center speaker.
2. Install the center speaker.
3. Install the crash pad center speaker grill.
Tweeter speaker (Front)
1. Install the front tweeter speaker to the front door delta cover.
2. Reconnect the connector and then install the delta cover.
Tweeter speaker (Rear)
1. Install the rear tweeter speaker to the rear door trim.
2. Reconnect the connector and then install the rear door trim.
Woofer speaker
1. Install the woofer speaker to the left quarter inner panel.
2. Reconnect the connector
3. Install the left luggage side trim.
External amplifier
1. Fold the 3rd seat back forward.
2. Reconnect the connector
3. Install the external amplifier on the floor panel.
NOTE:
-
Make sure the speaker connectors are plugged in properly.
-
Check the audio system.
