Borrego 2WD V6-3.8L (2009)
2. Installation is the reverse of removal.
Hood Seal Weatherstrip Replacement
1. Detach the clips, then remove the hood weatherstrip (A). Be careful not to scratch the hood.
2. Installation is the reverse of removal.
NOTE:
-
Replace any damaged clips.
Hood Weatherstrip Replacement
1. Remove the hood weatherstrip (A).
2. Installation is the reverse of removal.
Hood Release Handle Replacement
1. Using a socket (B), remove the hood release handle (A).
2. Installation is the reverse of removal.
NOTE:
-
Make sure the hood latch cable is connected properly.
-
Make sure the hood locks securely.
Hood Latch Replacement
1. Remove the front bumper cover.
2. Remove the hood latch cover (A).
