Borrego 2WD V6-3.8L (2009)
12.
Install the new exterior cover to the latch and secure the seven (7) tailgate retaining cover latches to the base of the latch. Slightly pry the three (3)
top alignment tabs into position. Reinstall the two (2) cover screws. Install the tailgate assembly to the vehicle and install the two (2) electrical
connectors.
13.
Install the four (4) mounting nuts to the rear tailgate control module and the three (3) bolts to the rear latch. Torque (5.06-7.95 lb-ft / 6.86-10.78
Nm ). Close rear tailgate and verify proper latching and auto latching feature.
14.
Install lower trim and door handle bolts. Install the lower trim machine screw and upper trim two (2) machine screws. Install the upper trim to the
tailgate.
WARRANTY INFORMATION:
*NOTICE
VIN inquiry for this repair is provided for tracking purposes only. Kia retailers should reference SA002 when accessing their Dealer
Communications System (DCS)