Borrego 2WD V6-3.8L (2009)
Power Window Control
1. P/Window enable signal on condition
A. P/window timer(from IPM) ON or IGN2 (ADM itself) ON
(When satisfied with one of two condition)
2. Up/down control signal
A. P/WDW Timer(from IPM) ON or IGN2 (ADM itself) ON
* P/Window timer (from IPM) OFF & IGN2 (DDM ITSELF) OFF, independently of Switch's state Up Signal And down signal are OFF state
preservation
(1) Auto/Manual Up Output(Signal) Operation Time Chart(T1:40mS±10mS)
(2) Auto/Manual Down Output(Signal) Operation Time Chart(T1:40mS±10mS)
Door Lock/Unlock (Controlled by IPM)
