Borrego 2WD V6-3.8L (2009)
Seat Heater: Service and Repair
Seat Back Heater
Seat Back Heater Replacement
1. Remove the seat back cover.
2. Cut the heater (B) attached to the sponge(A), as shown in the picture.
CAUTION:
-
Be careful not to damage the slave sponge.
3. Install the seat back cover.
A. Detach the paper from the back of the heater assembly.
B. Attach the heater to the main part of the sponge.
CAUTION:
-
Be sure to match the heater with main appearance.
NOTE:
-
Use HI-Scan tool to re-zero PODS system after replacing component.
