Borrego 2WD V6-3.8L (2009)
NOTE:
To install the timing chain with no slack between each shaft (cam, crank), perform the following procedure.
Crankshaft sprocket ->Timing chain guide -> Intake camshaft sprocket -> Exhaust camshaft sprocket.
The timing mark of each sprockets should be matched with timing mark (color link) of timing chain at during installation.
9. Install the RH timing chain tensioner arm (B) and the RH timing auto tensioner (A).
Tightening torque
A : 9.8 - 11.8N.m (1.0 - 1.2kgf.m, 7.2 - 8.7lb-ft)
B : 18.6 - 21.6N.m (1.9 - 2.2kgf.m, 13.7 - 15.9lb-ft)
10. Install the oil pump chain guide (A).
Tightening torque :
9.8 - 11.8N.m (1.0 - 1.2kgf.m, 7.2 - 8.7lb-ft)