Borrego 2WD V6-3.8L (2009)
Cabin Temperature Sensor / Switch: Service and Repair
Replacement
1. Disconnect the negative (-) battery terminal.
2. Remove the center facia panel(A).
3. Remove the audio assembly(refer to BD group-crash pad)
4. Loosen the heater controller(A) mounting screw.
5. Disconnect the heater controller connector(A) and then remove heater controller.
6. Disconnect the connector of in-car sensor. Loosen the mounting 2 screws and then remove the in-car sensor (B).
7. Installation is the reverse order of removal.
