Borrego 2WD V6-3.8L (2009)
Dimmer Switch: Testing and Inspection
Lighting System
Inspection
1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad side cover.
3. Remove the crash pad lower panel (A) after loosening the mounting screws.
4. Disconnect the connectors (A).
5. Remove the lower crash pad switch assembly (A) by using a suitable trim removal tool after loosening the screws.
6. Remove the rheostat from lower crash pad switch assembly.
7. Check for intensity of new rheostat switch. If the light intensity of the lamps changes smoothly without any flickering when the rheostat is turned,
it can be assumed that the rheostat is normal.
