Borrego 2WD V6-3.8L (2009)
hole illumination is switched ON for 20minute and then OFF.
When the Driver or Assist door is OPEN, and the ignition key position changes from RUN/START to OFF/ACC, then the keyhole illumination is
switched ON for 20minute and then OFF.
Description
When the system enters ARM WAIT mode by Remote Key or Mechanical cylinder lock switches, the key hole illumination is switched off immediately.
Description
If the keyhole is illuminated, and both the Driver and the Assist doors status changed to CLOSED, then a 30-second timer is started.
The keyhole illumination is maintained ON while this 30-second timer is running.
While running, this 30-second timer is restarted on reception of a Driver or the Assist doors status transition.
View Enhancement
Front Wiper and Washer
Description
The vehicle is equipped with a Front Wiper and Washer, locally controlled (manual operation) by a MF switch.
This functionality is directly accessible to the driver. It consists in the possibility to activate or deactivate the wiper of the front windshield. When the
driver decides to activate the front wiper, he has to choose between several modes of operation using the MF switch:
-
Continuous low speed;
-
Continuous high speed;
-
Auto (intermittent) mode (5 levels)
Another switch is used for the front washer. It consists in activating the front washer pump, which is located under hood. The washer activation has a
consequence on the activation of the front wiper in order to clean the windshield.
The driver can also be informed of the low level of washer fluid by an indication on the cluster display
Functional Diagram
IPM
Description
Interaction with Ignition Key position:
