Borrego 4WD V6-3.8L (2009)
4. After disconnecting the smart key unit connector, loosen the smart key unit mounting nuts(B) and remove the smart key unit(A).
RF Receiver
1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel (A).
3. Disconnect the connectors (A).
4. After loosening the mounting nut(1EA), disconnect the connector and remove the receiver (A).
Interior 1 Antenna
1. Disconnect the negative (-) battery terminal.
2. Remove the console assembly(A).
3. After loosening the antenna nuts(2EA) and connector, remove the interior 1 antenna (A).