Borrego 4WD V6-3.8L (2009)
3. Remove the hood latch (A) mounting bolts.
Tightening torque :
6.9 - 10.8N.m (0.7 - 1.1kgf.m, 5.1 - 8.0 lb-ft)
4. Disconnect the hood latch cable (A) and remove the latch (B).
5. Installation is the reverse of removal.
NOTE:
-
Make sure the hood latch cable is connected properly.
-
Make sure the hood locks securely.
Adjustment
Adjust Hood
1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left.
2. Adjust the hood height by turning the hood overslam bumpers (C).
3. After loosening the hood latch (D) mounting bolts, adjust the latch by moving it up or down, or right or left.