Borrego 4WD V6-3.8L (2009)
6. Disconnect the heater hoses (A), the fuel hose (B), the purge control solenoid valve (PCSV) hose (C) and the brake booster vacuum hose (D).
7. Remove the fuel pipe (A).
8. Disconnect the engine wiring connectors.
(1) Disconnect the power steering oil pressure switch connector (A) and RH knock sensor connector (B).
(2) Disconnect the MAP sensor connector (A), ETC connector (B), RH exhaust OCV connector (C), RH injector connector (D) and RH ignition
coil connector (E).
(3) Disconnect the LH knock sensor connector (A), LH/RH intake OCV connector (B) and LH exhaust OCV connector (C).
