Borrego 4WD V6-3.8L (2009)
8. Install the air cleaner assembly (C), and connect the AFS connector (A), breather hose (B).
Tightening torque :
7.8 - 9.8N.m (0.8 - 1.0kgf.m, 5.8 - 7.2lb-ft)
9. Install the radiator grill upper guard (A).
10. Install the engine cover (A).
11. Connect the battery negative cable (A).
NOTE:
-
Refill engine coolant.
-
Refill radiator and reservoir tank with engine coolant.
-
Bleed air from the cooling system.
-
Start engine and let it run until it warms up. (Until the radiator fan operates 3 or 4 times.)
-
Turn Off the engine. Check the level in the radiator, add coolant if needed. This will allow trapped air to be removed from the cooling system.
