Borrego 4WD V6-3.8L (2009)
14. Remove the LH/RH exhaust manifold (A).
Installation
1. Install the LH/RH exhaust manifold (A).
Tightening torque :
39.2 - 44.1N.m (4.0 - 4.5kgf.m, 28.9 - 32.5lb-ft)
2. Install the LH/RH exhaust manifold heat protector (A).
Tightening torque :
9.8 - 11.8N.m (1.0 - 1.2kgf.m, 7.2 - 8.7lb-ft)