Borrego 4WD V6-3.8L (2009)
Body Control Module: Service and Repair
Repair procedures
Inspection
1. The body network system consists of several Modules that communicates via a CAN bus. The diagnostic tester is not directly connected to the
CAN bus, but utilizes a one-wire communication line (K-line) that connects to a gateway in the IPM ECU.
2. The IPM communicates with the diagnostic tester directly. But other units operate self diagnostic, input/output monitoring and actuator operation
via the IPM using the CAN communication.
Input Monitoring
IPM (Instrument Panel Module)
