Borrego 4WD V6-3.8L (2009)
Fuel Filler Neck: Service and Repair
Removal
1. Remove the rear-LH wheel & tire, and the inner wheel house.
2. Disconnect the fuel filler hose (B) and the ventilation hose (A).
3. Remove the bracket mounting nuts (C) and remove the filler-neck assembly.
Installation
1. Installation is the reverse of removal.
Filler-neck assembly installation nut:
6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)