Borrego 4WD V6-3.8L (2009)
Spark Plug: Testing and Inspection
Inspect Spark Plug
1. Remove the ignition coil connector(A).
NOTE:
When removing the ignition coil connector, pull the lock pin(A) and push the clip(B).
2. Remove the ignition coil(A).
3. Using a spark plug socket, remove the spark plug.
CAUTION:
Be careful that no contaminates enter through the spark plug holes.
4. Inspect the electrodes (A) and ceramic insulator (B).
Inspection Of Electrodes
5. Check the electrode gap (A).
