Borrego 4WD V6-3.8L (2009)
Side Air Bag: Service and Repair
Curtain Airbag (CAB) Module
Components and Components Location
Components
Repair Procedures
Removal
1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
2. Remove the roof trim.
3. Disconnect the curtain airbag harness connector.
4. After loosening the mounting bolts and nuts remove the curtain airbag.
Installation
1. Remove the ignition key from the vehicle.
2. Disconnect the battery negative cable and wait for at least three minutes.
3. Tighten the curtain airbag mounting bolts.
Tightening torque
: 11.8 - 14.7 Nm (1.2 - 1.5 kgf.m, 8.7 - 10.9 lb.ft)
