Borrego 4WD V6-3.8L (2009)
Relay Box: Testing and Inspection
Fuse & Relay Box (Passenger Compartment)
Inspection
Fuse
1. Be sure there is no play in the fuse holders, and that the fuses are held securely.
2. Are the fuse capacities for each circuit correct?
3. Are there any blown fuses?
If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the
problem before installing a new fuse.
Relay (Rear Defogger)
1. Be sure that the relay (A) are held the each module securely.
2. Are the relay types for each circuit correct?
3. If system of some relay is not operate accurately, replace with a new one and check the system.
RAM (Rear Area Module)
1. Disconnect the negative(-) battery Terminal.
2. Remove the rear left luggage side trim.
3. Remove the woofer after disconnecting the connector (A) and loosening the mounting nuts (4EA).
4. Remove the RAM (A) after disconnecting the connectors (4EA) and loosening the mounting bolts (3EA).
