Borrego 4WD V6-3.8L (2009)
Rear Door Window Glass: Service and Repair
Glass Replacement
NOTE:
-
Put on gloves to protect your hands.
1. Remove the door trim.
2. Remove the glass mounting hole plug (B).
3. Remove the door belt weatherstrip.
4. Release the rear channel mounting bolt.
CAUTION:
-
Be careful not to drop to glass and scratch the glass surface.
5. Carefully adjust the glass (A) until you can see the bolts, then loosen them. Separate the glass from the glass run and carefully pull the glass out
through the window slot.
6. Installation is the reverse of removal.
NOTE:
-
Roll the glass up and down to see if it move freely without binding.
-
Adjust the glass position as needed.