Forte L4-2.0L (2010)
9. After loosening the mounting bolts and nuts, remove the crash pad (A).
10. Installation is the reverse of removal.
NOTE:
-
Make sure the crash pad fits onto the guide pins correctly.
-
Before tightening the bolts, make sure the crash pad wire harnesses are not pinched.
-
Make sure the connectors are plugged in properly, and the antenna lead is connected properly.
-
Enter the anti- theft code for the radio, then enter the customer`s radio station presets.
Lower Panel Replacement
Lower Panel Replacement
1. Remove the crash pad side cover (A).
2. After loosening the crash pad lower panel mounting screws, then remove the lower panel (A).
3. Disconnect the connector (A) and (B).
