Forte L4-2.0L (2010)
Parking Brake Shoe: Service and Repair
Repair Procedures
Removal
Parking Brake Shoe
1. Raise the vehicle, and make sure it is securely supported.
2. Remove the rear tire and wheel, then remove the brake caliper.
3. Remove the brake Disc (A).
4. Remove the rear hub unit bearing (A).
5. Remove the shoe hold down pin (A) and the spring (B) by pushing the retainer spring and turning the pin.
6. Remove the adjuster assembly (A) and the return spring (B).
7. Remove the parking brake cable (B) from the brake shoe (A).