Forte L4-2.0L (2010)
[Coupe]
(3) After pulling back the condenser fixing bracket and then, remove the radiator assembly.
5. Installation is reverse order of removal.
NOTE:
-
Bleed air from the cooling system.
-
Start engine and let it run until it warms up. (Until the radiator fan operates 3 or 4 times.)
-
Turn off engine. Check the coolant level and add coolant if needed. This will allow trapped air to be removed from the cooling system.
-
Put the radiator cap on tightly, then run engine again and check for leaks.
