Forte L4-2.0L (2010)
Timing Chain: Service and Repair
Repair Procedures
Removal
1. Disconnect the battery negative cable (A).
2. Remove the engine cover (B).
3. Remove RH front wheel.
4. Remove RH side cover.
5. Set No.1 cylinder to TDC/compression.
6. Drain the engine oil, and then set a jack to the oil pan.
NOTE:
Place wooden block between the jack and engine oil pan.
7. Disconnect the ground line and then remove the engine mounting bracket (A).
8. Remove the drive belt (A).
9. Remove the idler (A) and drive belt tensioner (B).
