Forte L4-2.0L (2010)
(2) Continuance operation : DTC code is more two
(3) Step operation
A. Normal or one fault code is same a continuance
B. DTC code is more two
4. If fault codes are displayed during the check, Inspect malfunction causes by referring to fault codes.
5. Fail safe
(1) Incar sensor : Control with the value of 23°C(73.4°F)
(2) Ambient temperature sensor: Control with the value of 20°C(67°F)
(3) Evaporator temperature sensor: Control with the value of -2°C(28.4°F)
(4) Temperature control actuator (Air mix potentiometer):
If temperature setting LO-24.5°C, fix at maximum cooling position.
If temperature setting 25°C-HI, fix at maximum heating position
(5) Mode control actuator (Direction potentiometer):
Fix vent position, while selecting vent mode.
Fix defrost position, while selecting all except vent mode.
(6) Intake control actuator :
Fix fresh position, while selecting fresh mode.
Fix recirculation position, while selecting recirculation mode.