Forte L4-2.0L (2010)
MANUAL MODE ECU UPGRADE PASSWORDS
7. When the GDS tool reports that the ECM upgrade has been successfully completed, click OK, turn OFF the ignition key, and wait at least 10 seconds
before attempting to start the engine.
8. Check for Diagnostic Trouble Codes using the GDS and erase any DTCs stored such as EPS, ESC, and TPMS. Due to CAN BUS multiple DTC's
maybe set during reprogramming.
AFFECTED VEHICLES & PRODUCTION RANGE:
2010 Model Year Forte/Forte Koup with 2.0L engine and Automatic Transaxle.
WARRANTY CLAIM INFORMATION
