Forte L4-2.0L (2010)
3. Connect the Main 16-pin DLC cable (GHDM - 241000) to the VCI
4. Connect the Main 16-pin DLC cable (GHDM - 241000) to the OBD-II connector located under the drivers side of the instrument panel
5. With the ignition key ON, turn ON the VCI and ODS tool Access the GDS vehicle identification number (VIN) screen and configure the vehicle
using the VIN AUTO DETECT Function.
6. Once back at the GDS Main Screen select ECM upgrade from the bottom right-hand corner Next select Auto Mode Engine. Perform the ECM
upgrade in accordance with normal GDS too ECM upgrade procedures.
