Forte L4-2.0L (2010)
6. Once back at the GDS Main Screen, select ECM upgrade from the bottom right-hand corner. Next, select Auto Mode, Engine.
Perform the ECM upgrade in accordance with normal tool ECM upgrade procedures.
MANUAL MODE ECM UPGRADE PASSWORDS:
* Do NOT perform Manual Mode ECM upgrade unless Auto Mode fails.
7. When the GDS tool reports that the ECM upgrade has been successfully completed, click OK, turn OFF the ignition key, and wait at least 10 seconds
before attempting to start the engine.
8. Check for Diagnostic Trouble Codes using the GDS and erase any DTCs stored in the Engine module, EPS, ESC and TPMS due to CAN System.
WARRANTY CLAIM INFORMATION:
