Forte L4-2.0L (2010)
Air Bag Control Module: Service and Repair
Depowered
Components and Components Location
Components
Repair procedures
Removal
1. Remove the ignition key from the vehicle.
2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
4. Remove the floor console.
5. Press the lock(1), the pull back the connector lever(2) until it click.
6. Disconnect the SRSCM harness connector(A) and (B) from the SRSCM.
7. Remove the SRSCM mounting bolts(3EA) from the SRSCM, then remove the SRSCM.
Installation
1. Remove the ignition key from the vehicle.
2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3. Install the SRSCM with the SRSCM mounting bolts.
Tightening torque (SRSCM Mounting Bolt)
: 9.5 - 13.6 Nm (1.0 - 1.4 kgf.m, 7.2 - 10.1 lb.ft)
NOTE: