Forte L4-2.0L (2010)
12. After clicking the Upgrade button, read Information then click OK.
13. The vehicle battery voltage is checked to make sure it is at least 12 volts to assure reliable upgrade results. Click OK if the results indicate Voltage is
OK.
14. Upgrade will begin and the progress of the upgrade will appear on the bar graph.
15. Upgrade will occur until 100% is reached on the bar graph. Turn the ignition key OFF for 10 seconds, place it back in the ON position and then click
OK to continue according to Information displayed on the screen.
16. Click OK on the final screen, which indicates when upgrade is completed.
17. Clear any DTCs that were created during the upgrade process.
18. After the completion of reprogramming, open the hood and affix the SC081 campaign completion label to the passenger side strut tower.
Manual Mode Upgrade Procedure Using The GDS:
NOTICE:
Do NOT attempt to perform a Manual Mode upgrade unless Auto Mode fails. Always follow the instructions given on the GDS tool in either Auto or
Manual mode. See table for Manual Mode password.
