Forte L4-2.0L (2010)
1. Select Manual Mode within ECU Upgrade screen; then select Upgrade Event # 118. TD ACU UPDATE; then select TD ACU: 95910-1M100 and
click OK.
2. Enter password from the table above.
3. Upgrade will begin and the process of the upgrade will appear on the bar graph.
NOTICE:
If battery voltage drops below 12 volts, check Cancel and charge battery to assure adequate state of charge for reliable upgrade results.
4. Upgrade will occur until 100% is reached on the bar graph. Turn the ignition key OFF for 10 seconds, then back to ON position and click OK to
continue according to information displayed on the screen.
5. Click OK on the final screen, which indicates when upgrade is complete.
Clear any DTCs that were created during the upgrade process.
6. Refer to Step 18 in the Automatic ECM Upgrade Procedure in regard to SC081 Campaign Completion Label placement.
AFFECTED PRODUCTION RANGE
PARTS INFORMATION
