Forte L4-2.0L (2010)
8. Make sure wiring for the seat belt buckle is correctly routed and secured.
^
Route harness under seat trim.
^
Secure harness to seat frame with push-in fastener. (new seat belt buckle harness is pre-assembled with fastener attached to harness)
^
Route harness through correct hole in seat frame.
9. Use a new plastic tie wrap to secure wire harness to underside of seat as indicated in photo.
10. Verify all the harnesses and connectors are properly routed and secured and that the connector mounting bracket is securely attached to seat frame.
